The TC4 alloy used in the experiment was forged in the β single-phase region and then rolled into a 70 mm thick plate in the α+β two-phase region. The...
The experiment also studied the effect of the original beta grain size on the level of ultrasonic flaw detection. Two kinds of test blocks with differ...
As far as possible, the cemented carbide tool is used. The tungsten-cobalt type hard alloy has the characteristics of high strength and good thermal c...
2. Reasonable selection of tool geometry parameters. In order to reduce the cutting temperature and reduce the tool sticking phenomenon, the front ang...
Suitable cutting parameters. To determine the cutting parameters, please refer to the following scheme: lower cutting speed - high cutting speed will ...
The flow rate and pressure of cutting fluid should be high in the process, and the cutting area should be fully and continuously cooled to reduce the ...
As a professional China ferro titanium factory and Ferrotitanium powder manufacturers,JinZhou Hengtai Special Alloy Co.,Ltd is an enterprise manufacturing and distributing special alloys, having high ferrotitanium、medium ferrotitanium and solid calcium metal cored wire as its main products.
language