The flow rate and pressure of cutting fluid should be high in the process, and the cutting area should be fully and continuously cooled to reduce the ...
Machine tools must always be careful to increase stability to avoid vibration trends. Vibration can result in chipping of the blade and damage to the ...
(6) The milling method generally uses down milling. Milling cutters and chipping caused by up-cut milling in titanium machining are much more severe t...
A common problem with grinding is that the crumbs cause blockage of the grinding wheel and burns on the surface of the part. Therefore, it is advisabl...
(9) Titanium alloy reaming also needs to be modified for the standard reamer: the width of the reaming blade should be less than 0.15mm, and the cutti...
(1) The tool is sharpened and kept sharp to ensure that as little cutting heat is generated during the machining process. (2) Equipment, knives, work ...
As a professional China ferro titanium factory and Ferrotitanium powder manufacturers,JinZhou Hengtai Special Alloy Co.,Ltd is an enterprise manufacturing and distributing special alloys, having high ferrotitanium、medium ferrotitanium and solid calcium metal cored wire as its main products.
language